In the box.
- 16ft LED rope light
- LIFX Wi-Fi smart controller
- Low voltage clamp connector
- Alternative mains power supply
- 10 x ground spikes
- 10 x screw mounts
- 10 x adhesive mounts
Installation Options
Ground Spike
Use this to put the Neon Flex light in garden beds and other in-ground locations.
Affix spikes to flex
Clip the spikes along the Neon Flex and then install by firmly pressing it into the soil.
Screw mounts
Your LIFX Neon Flex can be pressed into the screw mount channels provided. Use the screws or adhesive (as preferred) to place them first and create the desired shape
Low Voltage Clamps
Time to hook this baby up! Clamp the provided cable to your low voltage system wire, as you would any other accessory lighting product for your setup.
Low Voltage Checklist:
- Wi-Fi coverage that can reach where you want to place your furthest light. You can test your routers Wi-Fi range with your mobile phone as a guide.
- A 300W transformer or better, with a 15V output terminal. These lights are SuperBright, so check your transformer can support the number of lights. Review the calculations below under Transformer Requirements.
- 12 gauge outdoor wiring. The better quality your wiring is, the longer distance you can run your lights. 14 and 16 gauge wiring can be used but will limit the distance you can place your lights.
Mains powered
We know not everyone has a low voltage outdoor system installed. So, we've included a mains plug.
Just plug it in to an outdoor power outlet and you're ready to go. Easy!
Matter Easy Setup
Where's my Matter Setup Code?
You can find your Matter QR code in the back of your product manual. The manual is included in your small kit box, with the attachment accessories, power plug and controller.
Lost your user manual? Don't worry, you can also find the QR code and 11-digit Matter code printed on the back of your controller.
Connect to the LIFX App
iOS Set-Up
